DFI CS330 User Manual

www.dfi .com
45
Chapter 3 BIOS Setup
Chapter 3
Ipv4 PXE Support
Enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not
be available.
Ipv6 PXE Support
Enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support will not
be available.
PXE boot wait time
Set the wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or
numeric keys to set the value.
Media detect count
Set the number of times the presence of media will be checked. Use either +/- or
numeric keys to set the value.
CSM Configuration
This section is used to configure the CSM settings.
Enable/Disable CSM
Support.
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
Compatibility Support Module Confi guration
CSM Support
 Select Screen
 Select Item
Enter: Select
+/
- :
Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
[Disabled]
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
CSM Support
This section is used to enable or disable CSM Support. When CSM Support is set to
enabled, several options will appear for configuration.
Enable/Disable CSM
Support.
Version 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.
Compatibility Support Module Confi guration
CSM Support
Boot option fi lter
Option ROM execution
Network
Storage
Video
Other PCI devices
 Select Screen
 Select Item
Enter: Select
+/
- :
Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
[Enabled]
[UEFI only]
[Do not launch]
[UEFI]
[UEFI]
[UEFI]
Aptio Setup Utility - Copyright (C) 2018 American Megatrends, Inc.
Advanced
Advanced

DFI CS330 Specifications

General

Brand	DFI
Model	CS330
Category	Motherboard
Language	English