MODEL BMG-535 GRINDER
SECTION 2 SAFETY INSTRUCTIONS
9
OPERATING MANUAL
APRIL 2009
Grinding & Polishing
Check the machine visually for any damage and defects at least once a day.
In the event of operational malfunctions the machine must be shut down
immediately and secured.
Faults must be immediately remedied.
Carry out the switch on, and switch off, operations in accordance with the
operations manual.
Before turning on the machine verify that no one can be endangered when the
machine starts up.
Do not turn off the dust collector while the machine is running.
Secure the work area around the machine in public areas
providing a safety distance of at least 6.5 feet (2 meters) from the
machine.
All persons in the proximity of the machine must wear ear
protectors and safety shoes. In addition, the machine operator
must wear close fitting protective clothing.
Use only extension cables, used for extending the main cable, that
are sized and marked in accordance with the overall power
consumption of the machine and valid U. S. National Electric Code
guidelines or European VDE standards, as appropriate.
To Next Page
Loading...
