MODEL BMG-535 GRINDER
SECTION 4 TRANSPORT
33
OPERATING MANUAL
ARRIL 2009
Grinding & Polishing
To move the machine, press down the handgrips of the machine (see fig.3.2) until
the front part rises off the ground and the machine is well balanced. It can now be
pushed around on its wheels.
The machine should only be moved around after attachments are disconnected,
such as:
• Generator, (if being employed)
• Dust collection unit, (optional extra)
4.2 MANUAL MODE OF MOVING THE MACHINE
To Next Page
Loading...
