MODEL BMG-535 GRINDER
SECTION 7 MAINTENANCE
49
OPERATING MANUAL
APRIL 2009
Grinding & Polishing
Operating hours/time period
Inspection points, and
maintenance instructions
12 hours after repairing Check all accessible screw connections for
tightness.
Daily and prior to starting work
Verify all safety devices are working
correctly.
Check the power supply cable for damage.
Check the dust collector hose for damage.
Check the optional water tank and system
for damage, if applicable.
Check grinding disk coupling and remove
any foreign material and debris.
Check the grinding disc and the coupling
for wear.
Check the countersunk head screw of the
grinding disc for tightness.
Check the tension of the V-belt, adjust as is
required.
Check the brush dust seal.
Quarterly Clean the machine with a damp cloth.
Annually Full overhaul and cleaning of the complete
machine.
Replacement of the pulley parts. (about
200 hours).
7.2 MAINTENANCE AND INSPECTION LIST
To Next Page
Loading...
