It is highly recommended, that having the following spare parts on stock
will
avoid unplanned downtime and/or long equipment downtime that may result
from waiting for spare parts to ship.
Part No. Description Qty.
BG11924 Driving belt upper 1
BG11904 Driving belt middle 1
BG11928 Driving belt lower 1
See chapter 10 Diamond disc >1
The grinding pattern depends upon the surface being treated.
Depending on the required surface finish specified, the tools
(Diamond Wings),
will have to be changed in order to produce the best result. This may be done by
simply comparing the individual results of the tools.
For grinding applications, use the left-right switch of the machine every 330 sq.
ft. (100m
2
) to change the
rotation of the grinding head). This will also provide a
longer
life of the diamond tools, since they will wear down more equally.
Please note that this is NOT recommended for polishing applications.
Changing the rotation of the heads will result in large scratches that are difficult
to remove.
In the last 2mm of the diamond tools there is a loose buffer
material (no
diamond inside), changing the rotation helps ensure that the diamond tools do
not wear in such a way that diamonds are left on one side of the grinding disc
and the other side the diamonds are completely gone.
tools have been fitted.
unnecessary wear and repair costs.
To Next Page
Loading...
