9 ed. 0116 rev. 00
The Alarms shown in the display are:
ALARMS Cause of alarm
B5
No space on USB Memory full/ USB not reconize
B6
Error during copy remove the usb before end download or still inserted
on swicht on the unit
B7
Logger not connected Connection missing between Main and logger bo-
ard or still inserted on swicht on the unit
E13
Real time clock failure no set the correct value on DAY_Month_Year_H.our
5.1 To download all alarms logged in USB key, follow the procedure below:
Enter Factory menu :
keep presed both arrows till on display shows the label FACT
ok now insert the USB key.
The download will be as described in paragraf 3.1 pag 8.
5.2 At the END of Download in the folder BCF will be now another active folder named SER-
VICE:
Service
Haccp
Inside the Service folder there will be another folder named ALARMS.
Alarms
Inside this folder there is the subfolder ***ALARM LOG REPORT*** with datailed with file
in .TXT
ALARM
5
ALARM
ALARM LOG
To Next Page
Loading...
Need help?
General
