1 Introduction
ECO 9099 SOP05-5090F Rev.00 Effective Date: 12/20/18 Page 9 of 58
Data management Quality Control memory storage, 3 levels, 500+ values each;
Calculation of mean, standard deviation, coefficient of variation (CV)
Samples, 10000+ measurements
Diagnostic Programs Tests selected in Diagnostic Menu
Electronics Microprocessor-controlled and Interface-PC
Display Graphical touch screen, 800 x 400 pixels
Printer Integral thermal printer, 16 character width
Interface RS232C Serial Port
4 USB Ports
LAN/Ethernet
Electrical requirements 100 - 240 V, 50/60 Hz,
1.4 A max.
Self-adjusting
Nominal power
Consumption Minimum 10W/hour
Typical 25W/hour
Maximum 35W/hour
Dimensions
Height 335 mm; 13.2"
Width 315 mm, 12.4"
Depth 295 mm; 12.0"
Weight approx. 6kg; 14 lbs;
Classifications
Safety category I
Device Type B (according to EN 60601-1, 6010-2-101)
Mode of operation Continuous
Protection class IP 20
Explosion protection The device is not designed for operation in explosive environments.
Approvals CSA C22.2, EN 61010-1, CE, FCC Class B
Data subject to change without notice. Technical information is supplied for general informational
purposes only.
To Next Page
Loading...
