Motor control unit DCM31
24.04.2006 JT D:\FILES\MOTORST UND ZUB\DCM31\28505401_DCM31_EN.DOC
DCM31
1 or 2-leaf gate control for 24V
DC
drive units each 11A
Installation & operating instructions for electricians & (electrically) skilled
persons
Please keep these instructions in a safe place to ensure they are available should you
have any questions at a later date.
Not intended for issuing to end customers (users)!
- An instruction manual / instruction for use must be prepared for the user for “their
application”.
- A handover declaration and/or acceptance inspection certificate must be prepared.
- Any possible hazards must be pointed out to the user.
- Operation and servicing/maintenance of the unit must be explained.
Important! Please read these instructions before putting into service!
To Next Page
Need help?
General
