Dickert Electronic DCM31 - E) Function of the Keys

Motor control unit DCM31
13 / 35
Menu settings:
The menu item (A0...d9, prefixed letter) or the set menu value (00...99) is displayed.
e) Function of the keys
[X7]
“Menu” key [Ta.M]
[Ta.M] < 1sec actuated in function mode = switch the display between
gate status (horizontal bar)
and / input status (vertical bar).
“+” key [Ta.+]:
- in gate status mode and input status: opening or stop.
- in setting mode: see 6)a) Using menu function, p. 14
“-“ key [Ta.-]:
- in gate status mode and input status: closing or stop
- in Adjustment mode: see 6)a) Using menu function, p 14