14
15
CONTROLLER SETTINGS
The controller’s Settings screen contains everything else needed to
fully control your irrigation system. It can be reached by selecting the
Controller Settings button on the bottom of the screen. On this
screen you can turn on or off the entire system through the System
Active switch, add a rain delay to shut off the controller for a limited
time, budget each month to modify the watering duration based on the
season, set specic dates on which the timer should not run, and view
12-month history of the controller.
Use the settings menu to rename the controller to something
memorable and upload a picture for easy and fast recognition for future
viewing. Set a password to prevent unallowed users from connecting to
your timer. The password is saved to the phone so it will (almost) never
have to be entered again (unless it’s changed or when connecting to the
timer with a new phone).
Turn the entire
system on/off.
Controller will
not water when
system is off
Set a rain
delay
Set up to nine
dates where
the controller
will prevent
watering
Set name of
the controller
Set password for controller. Password will only be seen
when entering controller from a new phone. Reset
controller to reset password if forgotten
Budgeting
per month
(affects duration
only)
View monthly
watering
history for the
past 12 months
Set picture for
the controller
To Next Page
Loading...
Need help?
General
