Inactivity timeouts Port Access menu inactivity timeout
Digi CM and Passport Troubleshooting Guide
24
4. Expand the Host mode configuration section.
5. In the Inactivity timeout field, configure the time limit for serial port inactivity.
Port Access menu inactivity timeout
You can configure the inactivity timer for the Port Access menu.
1. Log in to the web interface on the device.
2. Select Serial port > Configuration. The Port access menu configuration page appears.
3. In the Port access menu inactivity timeout field, configure the time limit for Port Access
menu inactivity.
To Next Page
Loading...
