Digi CM - CLI Configuration Menu inactivity timeout (Digi Passport ONLY)

Inactivity timeouts CLI Configuration Menu inactivity timeout (Digi Passport ONLY)
Digi CM and Passport Troubleshooting Guide
25
CLI Configuration Menu inactivity timeout (Digi Passport ONLY)
You can configure the inactivity timer for the command line interface configuration menu.
1. Log in to the web interface on the device.
2. Select System administration > CLI configuration. The CLI configuration page appears.
3. In the Timeout for CLIconfiguration menu field, configure the time limit for the command
line interface configuration menu inactivity.