At a Glance
The Ethernet Gateway (Model #TM-WIFI440-Z) is a remote monitoring system that connects directly to the
Internet through an Ethernet cable connection (DHCP or Static IP). Connect wireless sensors to the gateway to
remotely monitor temperature, humidity, and more, and congure alerts when conditions fall outside of your set
ranges.
The Ethernet Gateway can use either wired sensors (connected directly to the unit) or wireless sensors. Each
gateway unit can be linked up to 24 wireless sensors and up to four wired sensors. Each sensor reading is
transmitted to our monitoring dashboard: Insights. If the monitoring dashboard is unable to communicate with
your gateway(s), you will be notied via Missed Report alerts as part of our system Health Check feature
For more information about SmartSense visit www.smartsense.co or call 1-866-806-2653
© 1996
-
2018 Digi International Inc. All rights reserved. All other trademarks are the property of their respective owners.
P4
A1/818