EasyManua.ls Logo

digicon CATRAX Plus - User Manual

digicon CATRAX Plus
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
1
Product Manual
plus
Question and Answer IconNeed help?

Do you have a question about the digicon CATRAX Plus and is the answer not in the manual?

Summary

1. Important Instructions

2. Orientations

3. Introduction

4. Features of Catrax Plus

4.1 Catrax Plus Operation

Explains the electromechanical and electronic operation of the turnstile, including sensors and locks.

5. Installation and Assembly

5.1 Unboxing

Initial inspection and verification of package contents before installation.

5.2 Floor Drilling and Column Fixation

Procedures and specifications for preparing the floor and mounting the turnstile column.

5.4 Assembling Arms and Covers

Step-by-step instructions for attaching the turnstile arms and upper covers.

5.5 Access to CATRAX Plus after Assembly

Methods for accessing the interior of the turnstile via rear, front, and column covers.

6. Optional Items

6.1 Collecting Box Kit

Description and function of the optional card collecting box for visitor management.

6.2 Pictogram Kit

Explanation of the pictogram kit used for visual signaling of passage direction.

6.3 Power Supply

Details of the optional power supply unit, including voltage adaptation and protection features.

6.4 Control Board

6.4.1 Inputs

Explanation of the input signals for passage clearance and their connection methods.

6.4.2 Configuration of Control Board - Switch Ds1

Guide to programming the control board using the DS1 dipswitch for various functions.

6.4.3 Outputs

Explanation of the output signals from the control board and their respective connections.

6.4.3.2 Electromagnets

Details on electromagnet outputs and their function in blocking the turnstile.

6.4.3.3 Sound Alarm

Explanation of sound alarm outputs and the conditions that trigger them.

6.4.4 Examples of Some Configurations

Illustrates controller settings for specific operational scenarios.

6.5 Anti-Panic System

6.5.1 Power Connection

Procedure for power connection related to the anti-panic system's arm disassembly.

6.5.2 Assembling the Arms

Step-by-step instructions for assembling the turnstile arms.

6.5.3 Maintenance Test

Recommended monthly tests and inspection sequence for the anti-panic system.

7. Maintenance

7.1 Preventive and Corrective Routine Maintenance

Detailed maintenance steps for sphere base, optical sensors, and electromagnets.

Lock and Sprocket Set Maintenance

Maintenance procedures for the lock and sprocket sets, including wear checks.

7.2 Defects and Possible Causes

Troubleshooting guide listing common defects, their causes, and corrective actions.

8. Technical Characteristics

8.1 Dimensions

Physical dimensions of the turnstile presented in diagrams with measurements.

8.2 Other Information

Additional technical specifications including weight, power, and consumption data.

9. Cleaning

9.1 Maintenance and Conservation of Stainless Steel

Procedures for routine cleaning, removing stains, and preserving stainless steel surfaces.

10. Warranty and Technical Assistance

digicon CATRAX Plus Specifications

General IconGeneral
Branddigicon
ModelCATRAX Plus
CategoryTurnstiles
LanguageEnglish