DigiDesign DIGI 1 - Page 39

Chapter 4: Connecting Your Studio 35
Connecting a bunch of microphones to a Digi 001
Connecting a synth to a Digi 001
use 48V Phantom
Power if necessary
mics3–8 go through the
mixer’s preamps
mic preamps
out to Digi 001
powered monitor
speakers
condenser mic
(usually requires
phantom power)
dynamic mic
(phantom power
won’t hurt it)
“snake” cable: you can also use
individual cables for each mic
small outboard mixer
audio out L/R
powered monitor
speakers
analog
inputs 3-4
L/R monitor outputs