Chapter 1: Welcome to Mbox 2
3
System Requirements
Mbox 2 can be used with a Digidesign-qualified
Windows or Macintosh computer running
Pro Tools LE software.
For complete system requirements, visit the
compatibility page of the Digidesign Web site
(www.digidesign.com/compato).
Compatibility Information
Digidesign can only assure compatibility and
provide support for hardware and software it
has tested and approved.
For a list of Digidesign-qualified computers, op-
erating systems, hard drives, and third-party de-
vices, refer to the latest compatibility informa-
tion on the Digidesign Web site
(www.digidesign.com/compato)
.
MIDI Requirements
Mbox 2 includes one MIDI In port and one
MIDI Out port, providing 16 channels of MIDI
input and 16 channels of MIDI output.
If you require additional MIDI ports, add a MIDI
interface to your system.
USB MIDI interfaces work effectively with
Pro Tools systems on Windows or Macintosh.
Serial MIDI interfaces are supported on Win-
dows systems only.
For a list of supported adapters, refer to the Digi-
design Web site (www.digidesign.com).
Hard Drive Requirements
For a list of qualified hard drives, see our
Web site (www.digidesign.com/compato).
If you are using an ATA/IDE or FireWire hard
drive, initialize your drive with Windows Disk
Management (Windows) or the Disk Utility ap-
plication included with Apple System software
(Macintosh).
Avoid Recording to the System Drive
Recording to your system drive is not recom-
mended. Recording and playback on a system
drive may result in lower track counts and fewer
plug-ins.
Only USB MIDI interfaces are compatible
with Pro Tools systems for Mac OS X.
Modem-to-serial port adapters and serial
MIDI devices are not supported.
Digidesign does not recommend recording
to the system drive. Record to a system drive
only when necessary.
To Next Page
Loading...
Need help?
General
