Digikeijs DR5000

DR5000 DIGICENTRAL
P 11
www.digikeijs.com
3.1 Introducon
To communicate with the DR5000 through the conguraon soware or a train control program, a USB connecon with the PC is required. (The following
chapters describe how it can be done through Wi-Fi or LAN). To achieve this, you need the accompanying USB cable with a mini connector, a so-called USB A to
USB mini cable.
3.2 Downloading soware
Do not connect the DR5000 yet, rst install the soware that can be
downloaded from the DIGIKEIJS website.
www.digikeijs.com/dr5000