Digikeijs DR5000

DR5000 DIGICENTRAL
P 27
www.digikeijs.com
5.1 Introducon
There are dierent opons to connect the operang soware to the DR5000.
Connecng through COM ports
First of all you need the right COM port numbers. This can be viewed easily by connecng the DR5000 through the USB cable on your computer on which the
Conguraon soware has been installed. Next, in the Conguraon soware click on the opon USB 2.0. A screen will then appear stang the
USB properes. The example below shows what protocol has been assigned to the dierent COM port numbers.
Connecng through LAN
To connect through the LAN network you have to look in your own router to nd what IP address the DR5000 has received.