To Next PageTo Next Page
Need help?Do you have a question about the Digikeijs DR5000 and is the answer not in the manual?
General| Manufacturer | Digikeijs |
|---|---|
| Category | Controller |
| Programming Track Output | Yes |
| Interface | Ethernet, USB |
| Protocols | DCC |
| Connectivity | USB, LAN |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
Details the 24-month manufacturer's warranty and conditions for voiding it.
Reserves rights for changes, errors, and illustrations; copyright notice.
Describes the DR5000 as a universal DCC controller for various connections and software.
Lists key technical specs like protocols, speed levels, decoders, solenoids, power, and connections.
Identifies and labels all physical connections and indicators on the DR5000 unit.
Explains the standard power supply, voltage range, and maximum output current of the DR5000.
Provides information on product compatibility testing and encourages user feedback.
Introduces the need for a USB connection to communicate with the DR5000 via software.
Instructs users to download the necessary software from the Digikeijs website before connecting the device.
Guides users through unpacking, installing, and ensuring administrator rights for the software.
Explains how to connect the DR5000 to the PC via USB and how Windows assigns COM ports.
Lists the various software options accessible via different connections on the DR5000.
Describes how to reset the DR5000 settings to factory defaults via USB or LAN/Wi-Fi.
Outlines the process for updating the DR5000's software and firmware, including important precautions.
Provides steps to recover the DR5000's firmware if an update process fails.
Lists the available firmware versions for the DR5000 with their release dates and descriptions.
Introduces the DR5000's built-in network router for LAN and Wi-Fi connectivity.
Guides on adjusting LAN settings, including IP address and network protocols, through the configuration software.
Explains how to configure Wi-Fi settings, including changing the default password for security.
Provides a solution for the "Access Error: Unauthorised" message when accessing LAN/Wi-Fi settings.
Outlines the different methods to connect operating software to the DR5000.
Details the steps to establish a USB connection with the Koploper software.
Explains how to connect the DR5000 to iTrain using a USB connection via LocoNet.
Guides on connecting the DR5000 to iTrain using a LAN connection with XpressNet protocol.
Details the process of connecting the DR5000 to Traincontroller via USB using LocoNet.
Explains how to connect the DR5000 to Traincontroller via LAN using Lenz Digital Plus.
Indicates future implementation for connecting RocRail via Xpressnet.
Indicates future implementation for connecting RocRail via LocoNet.
Provides instructions for connecting Win-Digipet software to the DR5000 via LAN.
Configures connected S88N feedback modules, including input counts and reporting options.
Manages LocoNet B properties, including LNCV programming, feedback monitoring, and booster overview.
Manages LocoNet T properties, including LNCV programming, feedback monitoring, and advanced settings.
Configures track output settings, including RailCom cut-outs, polarity, and current limits.
Configures XpressNet and Feedback Bus settings, including module addressing and scanning.
Configures PB-Bus properties, including short circuit delay and booster status detection.
States that RS-Bus functionality is not yet implemented in the software.
Details settings for Service or POM programming, address, CV values, and track load monitoring.
Displays USB properties, COM port assignments, firmware version, and options for updating or resetting.
States that Power settings are not yet implemented in the software.
Configures decoder and turnout addresses linked to infrared remote control channels.
Provides options for logging commands, driving locomotives, and operating switchboards.
Illustrates connecting DR4088CS feedback modules to the DR5000 via S88N.
Shows how to connect DR5033 LocoNet boosters to the DR5000 to increase power output.
Illustrates connecting DR4088LN-CS LocoNet feedback modules to the DR5000 via LocoNet T.
Illustrates connecting DR4088RB XpressNet/R-Bus feedback modules to the DR5000.
Shows how to connect DR5033 B-Bus boosters to the DR5000 to increase power output.
