Digikeijs DR5000

DR5000 DIGICENTRAL
P 18
www.digikeijs.com
3.7 Updang soware and rmware
The development of the DR5000 soware is connuing process. With rmware updates you can equip the controller with the latest soware. The conguraon
soware automacally checks for new versions at start-up or when online. New rmware is built-into the conguraon tool. So rst you have to install the lat-
est version of the conguraon soware before the rmware update becomes available.
Roadmap
1) First remove your current installaon of the conguraon soware.
2) Download the preferred version from our website.
3) Install the conguraon soware.
4) Connect the DR5000 with the USB cable.
5) Open the conguraon soware.
6) Go to the USB2.0 menu.
7) Use the ‘’UPDATE DR5000” buon to acvate the rmware update
IMPORTANT! Do not disconnect the DR5000 when updang the
rmware. This may cause the DR5000 to become unusable.
NOTE! Updang the DR5000 always means that the sengs are
put back to the factory sengs.