DR5000 DIGICENTRAL
P 8
www.digikeijs.com
2.4 Track voltage and power
Track voltage
As standard the DR5000 comes with a 19 volts switched and reced power supply with a power of at least 3.5 amps. Using another reced power supply is
possible provided this has a minimum voltage of 15 volts/DC and maximum voltage of 20 volts/DC.
The actual track voltage always deviates 1 to 1.5 volts downwards from the voltage that is connected to the voltage input of the DR5000.
So for the standard supplied 19 volts power supply, the nal track voltage is 17.5 volts.
It is not possible to set the track voltage using the hardware or the soware.
Maximum power
The maximum power that the DR5000 can deliver is 3 amps.
This power is set using the soware through the conguraon soware.
Click on the POWER menu aer which you can enter a maximum for power in
the sengs screen.
To Next Page
Loading...
Need help?
General