Page 28
Site requirements
Operating environment
• Relative humidity: 20% to 80% non-condensing
• Temperature: 15° C to 35° C (60° F to 95° F)
Electrical requirements
• The power supply is rated at 100-240 VAC, 50-60
Hz, 1.8 amp. (It adjusts to any power within this
range.)
• Single phase, 3-wire, grounded receptacle only.
Physical requirements
• The printer weighs less than 4 kg (9 pounds). The
weight depends on the supplies and options
installed.
• Printer dimensions are 419mm (16.5 inches) long,
and 198mm (7.8 inches) wide. The printer is 229mm
(9 inches) high.
• The clearances required are 25mm (1 inch) at the
back, 51mm (2 inches) on the left side, and 267mm
(10.5 inches) above the printer latch to open the
cover.
To Next Page
