2. Startup Wizard
When the NVR is launched for the first time, the STARTUP WIZARD will appear. This wizard helps you
set up the NVR’s most basic settings for proper functioning. You can access the Startup Wizard
screen at any time by clicking the Startup Wizard [ ] button in setting the
“MENU>SYSTEM>SETTINGS” menu. (See “4.1.5 SETTINGS”).
Only the ADMIN user can access the startup wizard.
2.1 Language
Select the language according to the country or user’s preference.
If “RUN STARTUP WIZARD UPON REBOOT” is selected, the Startup Wizard will pop up every time
the system is started.
2.2 Date/Time
Select the NVR’s date and time format, select the Time Zone, enable or disable daylight savings and
sync the NVR with an NTP server or manually enter the date and time. You can also select to
synchronize the NVR with an NTP server, which will automatically sync your NVR’s date and time
settings.
To Next Page
Loading...
