4.1 System
Information
SITE NAME
Enter a site name to differentiate the NVR from other sites if there is more than one NVR present.
KEYBOARD ID
Set up the SITE ID to match the ID settings of a keyboard controller. The keyboard model and BUAD
RATE must be set up in “MENU > DEVICE > KEYBOARD” (See “4.2.5 Keyboard”).
REMOTE ID
Users must set up a REMOTE ID to match with the ID setting of the IR remote controller if the user
wants to use it to control the NVR. (*This function may not be supported depending on the NVR
model.)
DATE/TIME
Using the available options, the administrator can manually adjust the system date and time, select
the time and the date format, and select the appropriate time zone. If applicable, check the ‘USE
DST’ box to use daylight savings time.
There are three types of time sync modes.
• Server Mode: The operating NVR is set as a Time Sync Server, which can synchronize the
time settings of other NVR(s) that are connected to it over the same network.
To Next Page
Loading...
