5. Web Surveillance with Web Browser
The VMAX
®
IP G4™ has a built-in web server by itself. This allows you to access the system by an
ordinary web browser via the network for live monitoring, playback, or remote configuration without
installing any additional software.
5.1 Web Login
Using a web browser (Google Chrome is recommended), type the NVR’s IP Address or DDNS
address in the address bar. If the Web Port is set to the default (Port 80), the URL would be
“192.168.1.80”, which is the equivalent of “192.168.1.80:80”. However, if the Web Port was changed
to “85”, the URL would look like “192.168.1.80:85”.
When the login page appears, enter the user ID and password. The default user ID is “admin”
and the password is set by the administrator when the NVR is booted-up for the first time.
5.2 Web Monitoring
After logging in, the live view from the NVR will appear on the web page automatically. Users can also
select Playback, Setup, QSG, Manual, FAQ, Support, or Logout.
To Next Page
Loading...
