Audio Channel
PTZ Camera
Transaction Verification
If you cannot find any recording icon in the right corner of the screen, then the system is not
recording. Check the recording schedule or camera in the main setup menu.
Pop-up Menu
Users can right-click with the mouse to prompt the pop-up menu. If the user
wants to control a specific channel, hover the mouse cursor over the desired
channel then right-click.
DISPLAY MODE
Change the screen display mode from the available split-screen options.
CHANGE NEXT CH
Cycle to the next channel or next group of cameras in the current split-
screen mode.
SEQUENCE
When “SEQUENCE” is selected, an icon will appear in the
bottom-right corner of the screen. The display screen will sequentially
cycle through the registered cameras.
DIGITAL ZOOM
• Digital Zoom is available in a single-channel view only. When
“ZOOM” is selected, an icon will appear on the right-
button corner of the screen and digital zoom control is available.
• To zoom in, click-and-drag the mouse over the desired area to
create a zoom area. You can also zoom-in or zoom-out by
scrolling the mouse wheel. The user can move the zoom area by clicking on the edge of the
square and dragging it.
• To exit from zoom mode, right-click and select “ZOOM EXIT’ on the menu.
IMAGE ADJUSTMENT
View the adjusted camera image menu (Please refer to “4.2.1 Camera”). Users can adjust images
such as brightness, contrast, color, etc. The available options depend on the camera’s ONVIF
integration. See the camera’s manual for more information.
PTZ
Activate PTZ control mode. (Please refer to “3.6 PTZ Operation” for detail.) The available PTZ
options vary depending on the camera’s ONVIF integration and PTZ capabilities. See the camera’s
manual for more information.
CAMERA SETUP
View the setup camera menu. (Please refer to “3.4.1 Setup for each camera”)
Users can set up resolution, framerate, etc. The available options depend on the camera’s ONVIF
integration. See the camera’s manual for more information.
FREEZE
To Next Page
Loading...
