• SHOW OBJECT AREA: This shows the area of a
detected object.
NOTE: To enable the SHOW EVENT AREA, this
option must be disabled.
• SHOW OBJECT TRAIL: This shows the trail when a
detected object is moving.
• SHOW OBJECTED ID: This shows the ID of a
detected object.
• SHOW EVENT AREA: When checked, the event area is displayed only when an event occurs.
To use this option, SHOW OBJECT AREA must be disabled.
• SHOW RULE AREA: This shows the ‘RULE’ area. (Refer to the camera’s manual for the RULE
setting.)
To Next Page
Loading...
