Display
Set the Sequence dwell time, Display Resolution, OSD display options and spot-out channel.
SEQUENCE TIME
Set the dwell time for the channel sequence display. Camera channels will rotate during Sequence
according to this setting.
DISPLAY RESOLUTION
The system supports the following kinds of resolutions: 800x600, 1024x768, 1280x1024, 1920x1080
and 3840x1260. Set the proper resolution output per the connected monitor resolution. DO NOT set
the display resolution to be higher than what the connected display monitor can support.
OSD
Select what information will appear and overlay the channel displays by checking the corresponding
boxes.
SCREEN SAVER
The Screen Saver feature protects the display monitor’s screen and reduces resource use of the NVR
by turning the display off after a set time of inactivity. Set the screen saver’s waiting time for when
the monitor will automatically turn off. Set in between 1 minute and 180 minutes. For increased
security, select to log off the current user when the screen saver activates.
CHANNEL SWAP
Check for swapping the channel by drag and drop.
VIDEO ENHANCEMENT
Set the display details such as brightness, contrast, sharpness and etc. (*This function may not be
supported depending on the NVR model.)
To Next Page
Loading...
