Digital Watchdog VMAX IP G4 DW-VG416 T16P Series - Page 55

55
VMAX
®
IP G4™
Transaction Verification Settings
Transaction verification equipment can be connected to NVR through the RS-232 port or LAN.
NO
Port Number of the Serial connection (RS-485 terminal block). For example: NO1 = COM1, NO4 =
COM4.
CAM
Assign a camera to the Transaction Verification device. The Transaction information will be
associated with the assigned camera.
TYPE
Connection type between NVR and Transaction Verification device.
PROTOCOL
The communication protocol between NVR and Transaction Verification device.
SAVE
Enable or disable the NVR to save the transaction data.
SHOW
Enable or disable the NVR to display the transaction data.
SETUP (1)
Transaction Verification Settings


