D2 PAD | 18
2. Tap the access point name that you wish to connect to. If the selected access point is protected by a
password, the device will prompt for the password. (Note: Password entry is only required when
connecting to the AP for the first time.)
3. When prompted, enter the password to connect to the AP.
4. Tap Connect.
Other Wi-Fi Options
Tap the Advanced icon on the upper-right corner of the screen to display advanced options and other
network information.
When the Network notification option is checked, the system automatically scans and displays available
networks within range. If it is unchecked, you must tap SCAN to manually scan for nearby networks and
tap ADD NETWORK to manually do so.
To Next Page
Loading...
