DigiTech Expression EX-7 Factory User Manual

Selecting and Enabling an Effect Model
1. Use the MODEL KNOB to select an Effect Model. (Refer to the Ef-
fect Model Control table for a list of Effect Models.)
2. Rock the pedal forward and press firmly on the
TOE SWITCH.
The INDICATOR LED lights green to show that the Effect Model is
enabled.
3. To bypass the Effect Model, rock the pedal forward and press firmly on
the TOE SWITCH. The INDICATOR LED turns off to show that
the Effect Model is bypassed.

DigiTech Expression EX-7 Factory Specifications

General

Brand	DigiTech
Model	Expression EX-7 Factory
Category	Music Pedal
Language	English