Flexible Output Mode
TM
Setup
1. Power up the Expression Factory
TM
Pedal.
2. Select Model 7 using the MODEL knob.
3. Press and hold the HEEL SWITCH for three seconds. The INDICA-
TOR LED begins to flash green.
4. Release the HEEL SWITCH.
5. Turn the
MODEL knob to Model 5 if you want to use AMP/MIXER
mode (which lets you plug into both an amplifier and a mixer simulta-
neously).
Turn the MODEL knob to Model 6 to select STEREO AMP mode.
Leave the
MODEL knob at Model 7 to keep the factory default STE-
REO MIXER mode selected.
6. Press the TOE SWITCH to exit Flexible Output Mode Setup; the
INDICATOR LED turns off and the pedal is bypassed.
NOTE: Selecting any other Models besides 5, 6, or 7 will prevent you
from exiting Flexible Output Mode Setup.
To Next Page
Loading...
