SINgLE
Lights when a Single playback phrase resides in the selected memory
location.
CaRD bUSY
Lights when there is read/write activity on the CompactFlash
®
card. The card
should not be removed when the CaRD bUSY LED is lit.
4. Display
Displays which loop memory location is selected. It also shows information
during store/copy procedures, during Time Signature and Rhythm Type
setup, USB connection, and file deletion/card formatting procedures.
5. Select Knob
Used for selecting different loops on the CompactFlash card and making
selections when in other modes (such as Time Signature and Rhythm Type).
6. Mic Level Knob
Controls the input signal from the XLR MIC INPUT jack.
7. Peak LED
Lights when the Instrument, Mic, or Aux Input signals are too loud. Adjust
the INST LEVEL or MIC LEVEL knobs so this LED lights only occasionally. If
the aUx INPUT is being used, adjust the output level of the audio source.
8. Inst Level Knob
Controls the input signal from the 1/4” INST. INPUT jack.
9. Record Mode/Stop Mode LEDs
Indicate which Record Mode or Stop Mode is selected.
9
Guided Tour - Front Panel
To Next Page
Loading...
Need help?
General
