12
the Studio Quad makes it simple.
Here's how to change the tempo of the delays:
• If you're not already there, switch to Program mode and use the
Data wheel to scroll to Factory Program 40. The display reads:
• Press <FX EDIT>. Note: the current module being edited is
flashing in the Effect Routing Matrix. The display reads:
• Press <NEXT PAGE> twice. Position 2 of the Information line
shows that the current delay time setting is 500 milliseconds.
Remember that the total delay time shown in the display is divid-
ed among the delay taps in the Module. The display reads:
• Use the Data Wheel to decrease the delay time. Both that the
Store button illuminates and the CHANGED icons turn on indi-
cating that the Program has been modified.
• Press the <Program> button to return to Program Mode, or con-
tinue in Edit Mode by continuing to press the <FX EDIT> button.
Note: Make sure you store the settings after you have made any
changes. See pg. 16 for more information.
EFFECT & INPUT / OUTPUT CONFIGURATIONS
The Studio Quad's ability to accommodate a number of different input
and output routing configurations makes it an extremely useful and
flexible tool for many different applications.
Programs 1 through 12 in the Factory Program bank represent all the
FX module configurations available in the Studio Quad. For diagrams
of these 12 Effect Configurations, see pg. 41. When you find one that
To Next Page
Loading...
Need help?
General
