38
FACTORY RESET
Allows you to erase all User Program and Utility settings at once and
restore the Studio Quad memory to its factory condition.
WARNING! This procedure will destroy and reset ALL User Programs
in the Studio Quad's memory. Be sure you want to erase the memory,
and start fresh before continuing with this procedure.
To perform a factory reset, do the following:
• Press <UTILITY> and scroll to Page 7 of the Utility Menu using
the <NEXT PAGE> and <PREV PAGE> keys. The display reads:
• To initiate the reset, press <4>.
• This is your last chance to change your mind. If you are sure,
press <3>. If not, you can abort the procedure by pressing <4>.
If you press <3>, the Information line of the display briefly reads:
FACTORY RESETTING... after which the unit resets, and returns
to Program 1.
In extreme situations, the Studio Quad can be reset using a special
power-up procedure. This will also completely reset the Studio Quad,
eliminating any custom settings created by the user. The procedure is
as follows:
• Press and hold the <1> Parameter button while applying power
to the Studio Quad.
• Release the <1> Parameter button after an asterisk appears in
the information line on the screen.
* Press the <Program> button, and the Studio Quad will re-initial-
ize itself.
To Next Page
Loading...
Need help?
General
