# If the wireless parameters are not correct or not set yet, you have to use LAN to access
MFP Server Control Center.
3. If the tool finds MFP servers in your local area network, then you have to select
a MFP server from the server list.
4. Double click the highlighted server (or click the “Configure MFP Server” button)
and type the server’s administrator (default: admin) and password (default:
admin).
5. After you login successfully, from the Server menu, select wireless. The set
Wireless dialog appears.
6. In order to join an existing wireless network, you have to set the correct
network type (infrastructure or ad-hoc), SSID, and the correct security method
with the correct key information.
7. If the wireless network is secured by WEP64 or WEP128, authentication method,
key index, and WEP key must be set correctly.
10
To Next Page
Loading...
Need help?
General
