8. Click Submit to save your settings. And the server will reboot.
9. You have now finished the procedure of setting the wireless parameters.
# In infrastructure mode, DN-13018 searches all channels to join the matched wireless
service set. In ad-hoc mode, DN-13018 searches all channels to join the matched wireless
ad-hoc service set too, however, if none are found, DN-13018 creates that service set in the
assigned channel.
# In ad-hoc mode, WPA-PSK/TKIP is not allowed.
After properly configuring the wireless parameters, you can remove the network
cable and reboot the DN-13018. DN-13018 will then connect to your wireless
network. DN-13018 will detect if a network cable is plugged-in or not. If a network
cable is plugged-in, DN-13018 will always connect to the network through the
network cable. Otherwise it will always connect to the network through wireless
module. Once DN-13018 connects to the network, either by network cable or by
wireless module, all operations of print / scan / file server are exactly the same.
3.3 Assigning an IP Address to the Server
3.3.1 Preliminary
If you have a DHCP server on your network, your Server will receive an IP
address automatically. The IP address will then appear on the Control Center
or on the page of configuration report that you printed earlier. If your DHCP
server does not give an IP address to the Server, the Server will use the
Factory IP address: 192.168.1.100.
If you are not working in a DHCP network, you need to manually set the
Server’s IP address.
3.3.2 Ethernet Address
You do not need to know the Ethernet address of your Server for assigning an IP
address to it. The Control Center can automatically search Servers and list their
Ethernet addresses. Besides, you can find Ethernet address that is located on the
backside label of the Server.
3.3.3 IP Address
Unless you are assigning an IP address using DHCP, you must obtain an unused IP
address from your network administrator.
3.3.4 Methods for Setting the IP Address
You can set the IP address of your Server using one of the following methods,
depending on your network operating environment:
Automatic IP Address Assignment
Manual IP Address Assignment
16
To Next Page
Loading...
Need help?
General
