4.4.4 Using the Control Center for Raw TCP/JetDirect Printing
Windows Platform: Windows 2000, XP and 2003
1. Start the Control Center, right-click on your Server and select Set Printer.
2. Select USB1 Port or USB2 Port to add the printer in Set printer in box, choose
to use or IP address to represent the Server in Select IP Address or Host
Name in printer port box, and select the network printing protocol of Print
with Raw TCP Mode.
# If your Server is running on a different LAN than your Windows PC such as
Internet PC, you must choose IP address in Select IP Address or Host
Name in printer port box.
3. Click Apply.
4. Select the desired printer driver and click Set Port to Printer.
31
To Next Page
Loading...
Need help?
General
