Server” function.
8.2.2 Displaying Server Status
You can start the Control Center and click on a server to see its status which includes
Server Information, TCP/IP status, and Supported Protocols.
8.2.3 Setting up Server Configuration
Click the “Configure Server” button to setup the highlighted MFP server. Then type the
administrator ID and password to login.
General Configuration
Server Information: You have to set some information for using SMB
protocol:
5 Server Name: the name to represent the Server for using SMB/CIFS
protocol
5 Workgroup: the name of the SMB/CIFS workgroup that the Server
belongs to.
5 Description: optionally set to describe the Server
File Server Codepage: If users want to communicate files using FTP
client tool or SMB on Windows 98 SE/Me/2000 with the Server, they have
to set their Server codepage to be same as the codepage that their
Windows PC is using. Generally, the criteria of choosing codepage are
based on your Windows codepage. For example, if your Windows
codepage is Traditional Chinese, you have to select Traditional Chinese
(Big5) in the Server. Please refer to the chapter “File Server”.
TCP/IP: You have to set the Server’s TCP/IP configuration to connect TCP/IP
network. Please see the chapter of Basic Installation for more details.
Supported Protocols: The Server supports the following TCP/IP protocols:
TCP/IP
5 Enable LPR (Line Printer Remote) Printing: select or clear Enable LPR
Printing support. It is enabled in Factory Default.
5 Enable IPP Printing: select or clear Enable IPP Printing support. It is
enabled in Factory Default.
5 Enable Raw TCP Printing: select or clear Enable Raw TCP Printing
support. It is enabled in Factory Default and users may set the
protocol’s TCP ports as following boxes:
- TCP Port 1: set TCP port for the printer of USB1 port (default: 9100)
- TCP Port 2: set TCP port for the printer of USB2 port (default: 9101)
5 Enable SMB/CIFS Print/File Server: select or clear Enable
SMB/CIFS Print/File Server support. It is enabled in Factory
Default.
- Enable Internet Access: select or clear Enable Internet Access
support. If you clear the item, you do not allow that users can
65
To Next Page
Loading...
Need help?
General
