EasyManuals Logo

Digitus DN-13007 User Manual

Digitus DN-13007
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Chapter1 Introduction
Thank you for purchasing this Digitus DN-13007/DN-13008/DN-13018 USB MFP
Server (in the following referred to as “Server”). This Server is designed to connect
your AIO/MFPs (All-In-One/Multifunction Peripheral), printers, USB mass storages
(hard drives, flash drives, and memory card readers), and scanners, to your network,
allowing all network users access to these shared USB devices resources.
1.1 About 3 Models Described in this Manual
This manual provides introductory information as well as detailed instructions on how
to set up and manage Digitus DN-13007/DN-13008/DN-13018 in various network
environments. The following table shows the differences among the 3 models. All 3
models have a 10/100 Mbit/sec Lan port. However, DN-13008 has only one USB port,
while both DN-13007 and DN-13018 have two USB ports. Compared with DN-13007,
DN-13018 has an additional wireless module (802.11b/g). Except for the wireless
configuration, most configuration and operations are the same for DN-13007 and
DN-13018. Similarly, almost all of the configuration and operations are the same for
DN-13007 and DN-13008 except that only one USB device can be connected to
DN-13008 while at most two USB devices can be connected to DN-13007. Unless
explicitly specified, all instructions in the manual apply to DN-13007 and DN-13008
and DN-13018.
Model LAN Wireless
USB Port(s)
DN-13008 Yes No 1
DN-13007 Yes No 2
DN-13018 Yes Yes 2
To fully benefit from this document, you should be familiar with basic networking
principles. The instructions described in this manual are based on the settings in a new
Server. To reload the Factory Parameters, you can reset this Server back to Factory
Default, which will restore most of the settings. For details, please refer to the chapter
“Restore Factory Defaults”.
1.2 Customer Support
Should you require any technical assistance, please contact your product reseller. Or
you can visit our website at http://www.digitus.info for latest product information.
This document is subject to changes without prior notice.
5

Table of Contents

Other manuals for Digitus DN-13007

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digitus DN-13007 and is the answer not in the manual?

Digitus DN-13007 Specifications

General IconGeneral
BrandDigitus
ModelDN-13007
CategoryPrint Server
LanguageEnglish

Related product manuals