5. Set up File Server Configuration:
A. Set SMB/CIFS Print/File Server
Enable SMB/CIFS Print/File Server: select the item, if you want to
support SMB/CIFS print/File server.
Enable Internet Access: clear the item, if you do not allow that users
can access your SMB/CIFS server via Internet. If you select the item,
you allow Internet users can access your storage using the SMB/CIFS
protocol.
Enable Server Authentication: select the item, if you want to share
your storage with user level security which requires user name and
password to login. If you clear the item, your storage will be shared
without security.
B. Set FTP Server:
Enable FTP Server: select the item, if you want to support FTP server.
FTP port: enter the desired FTP port. The default value is 21.
Maximum Session Number: select the item and fill in desired
49
To Next Page
Loading...
