Digitus DN-13007 - Chapter 14 Upgrade Firmware; Procedure A: Using the Control Center; Procedure B: Using the Servers Web Pages

Chapter14 Upgrade Firmware
This chapter describes how to upgrade firmware. Please follow one of the following
Procedures:
Procedure A: Using the Control Center
1. Open Control Center. It will automatically search the existing Servers and display their
statuses.
2. Select the Server that you want to upgrade the firmware. Double click the selected
Server and enter Administrator (default: admin) and Password (default: admin).
3. Select the Maintenance button.
4. Click Open to find your new firmware file and click Upload to start upgrading the
firmware.
5. Wait for 20 seconds for system reboot.
Procedure B: Using the Server’s Web Pages
1. Power on the Server. Suppose that the Server is in DHCP mode.
84
2. Check the Server's IP address.