15 / 38
5. Double click ‘Network Connections’.
6. Right-click ‘Wireless Network Connection’ (it may have a number as
suffix if you have more than one wireless network card, please make sure you
right-click the Wireless LAN 802.11n USB Network Adapter), then select ‘View
Available Wireless Networks’.
7. All wireless access points in proximity will be displayed here. If the
access point you want to use is not displayed here, please try to move your
computer closer to the access point, or you can click ‘Refresh network list’ to
rescan access points. Click the access point you want to use if it’s shown, then
click ‘Connect’.
To Next Page
Loading...
Need help?
General
