36 / 38
The description of all setup items are listed below:
Beacon Interval Please input wireless beacon time interval here.
DTIM Period
Please input DTIM (Delivery Traffic Indication
Message) here.
Preamble Mode
Select wireless frame preamble mode (long or short)
from dropdown menu.
Set Defaults Reset all settings back to factory default value.
Apply Save changes.
If you changed any setting here and cause problem on communicating with
wireless clients, click ‘Set Defaults’ to reset all settings back to default setting.
4.3 Wireless Statistics
Select ‘Statistics’ menu and the data statistics about software access point will
be displayed.
Click ‘Reset’ to reset the value of every item back to ‘0’.
To Next Page
Loading...
