37 / 38
4.4 Internet Connection Sharing (ICS)
In this page, you can assign a network card on your computer as the path for
all wireless clients to get connected to Internet.
If you have only one network card (except this software access point), you
don’t have to select network card here; if you have more than one network
card, select the one you wish to be used as Internet gateway.
Click ‘Apply’ to save changes
(‘Apply’ is grayed out when no changes are made in this page).
CHAPTER 5: Troubleshooting
If you encounter any problem when you’re using this wireless network card,
don’t panic! Before you call your dealer of purchase for help, please check this
troubleshooting table, the solution of your problem could be very simple, and
you can solve the problem by yourself .
Scenario Solution
I can’t find any
wireless access
point / wireless
device in ‘Site
Survey’ function.
1. Click ‘Rescan’ for few more times and see if you
can find any wireless access point or wireless device.
2. Please move closer to any known wireless access
point.
3. Ad hoc’ function must be enabled for the wireless
device you wish to establish a direct wireless link.
4. Please adjust the position of network card (you
may have to move your computer if you’re using a
notebook computer) and click ‘Rescan’ button for few
To Next Page
Loading...
Need help?
General
