30 / 38
If you select ‘No’, wireless network card will prompt you to enter 8-digit PIN
code into your AP, without selecting an AP in advance.
After you select ‘Yes’ or ‘No’ in previous step, network card will attempt to
connect to WPS-compatible AP, and an 8-digit number will appear. Please
input this number to AP’s configuration menu within 2 minutes, and
network card will establish secure connection with AP automatically.
To stop this procedure before connection is established, click ‘Cancel’.
3.4.2 Push Button
To use Push-Button WPS configuration, please click ‘Push Button Config
(PBC)’ button. This is the easiest way to establish secure connection by WPS,
but if there’re more than one WPS-compatible AP using Push-Button config,
please use PIN Code instead.
To Next Page
Loading...
Need help?
General
