11
C. Interior Light Control
Turn the interior light control knob to increase or decrease the
brightness of the interior light.
D. Heater Thermostat Control
To adjust the temperature to your individual requirements, turn the
thermostat control clockwise all the way to turn on the heater. When
the room reaches the desired temperature, turn the thermostat knob
counter clockwise until you hear a click. Leave in this position to
maintain the room temperature at its setting. For additional heat, turn
clockwise until you hear the click again and the heater will turn on. To
turn the heater off, rotate the knob fully counter clockwise.
E. Main On/Off Switch
The Main On/Off Switch supplies power to all fireplace functions.
Resetting the Temperature Cutoff Switch
This unit is equipped with a thermostat which controls the temperature
of the room by turning the heater on and off. The heater is protected
with a safety device to prevent overheating. Should the heater
overheat, an automatic cut out will turn the heater off and it will not
come back on without being reset. It can be reset by switching the
Main On/Off Switch to off and waiting five (5) minutes before switching
the unit back on.
CAUTION: If you need to continuously reset the heater, unplug the
unit and call Technical Support at 1-888-346-7539. Please have
your model and serial number ready when calling.
Maintenance
WARNING: Disconnect power before attempting any maintenance
or cleaning to reduce the risk of fire, electric shock or damage to
persons.
Light Bulb Replacement
Allow at least five (5) minutes for the light bulbs to cool before touching
them to avoid accidental burning of the skin. The light bulbs need
To Next Page
Loading...
Need help?
General
