Dimplex XHD23L User Manual (English)

Other manuals for Dimplex XHD23L

Questions and Answers:

H
hamiltonjulieSep 6, 2025
Why won't my Dimplex Indoor Fireplace turn on using the manual controls?
- M
  michelle83Sep 6, 2025
  If your Dimplex Indoor Fireplace firebox isn't turning on using the manual controls, there could be several reasons: * **Improper Operation:** Refer to the operation section for instructions. * **No Power:** Check the fuse/breaker panel to ensure there's incoming power from the electrical wall socket. * **Power Bar:** Make sure the unit is not plugged into a power bar, surge protector, or extension cord. * **Main Control Board:** The main control board could be defective and need replacing. * **Touchpad Connection:** Check the touchpad connection to ensure it's secure. * **Touchpad:** The touchpad itself may be defective and need replacing. * **Power Supply:** The power supply could be defective and need replacing.
N
nhillAug 25, 2025
What to do if my Dimplex Indoor Fireplace does not turn on using the manual controls?
- T
  thomassandraAug 25, 2025
  If your Dimplex Indoor Fireplace isn't turning on with the manual controls, several factors could be at play. First, ensure the unit is not plugged into a power bar, surge protector, or extension cord. Check the fuse/breaker panel to ensure there is incoming power from the electrical wall socket. Other potential issues include a defective main control board, touchpad, or power supply, as well as a loose touchpad connection. In such cases, consider replacing the main control board, touchpad, or power supply and checking the touchpad connection.
D
Denise WeberAug 25, 2025
What to do if my Dimplex Indoor Fireplace does not respond to the remote control?
- M
  Melissa MitchellAug 26, 2025
  If your Dimplex Indoor Fireplace isn't responding to the remote, the batteries might need replacing. You can change the batteries. Alternatively, the remote control or touchpad could be defective, requiring replacement.
K
kpenaAug 27, 2025
Why is the flame not visible on my Dimplex XHD23L Indoor Fireplace?
- J
  Joseph HarrisonAug 27, 2025
  If the flame is not visible on your Dimplex Indoor Fireplace, it could be due to several reasons. If you have log models, ensure the color theme is not set to t0, as the flame might be turned off. Another cause could be a defective flame LED strip or a defective main control board, in which case you should replace the flame LED strip or the main control board.
M
Manuel HarperAug 27, 2025
Why is the media not illuminated on my Dimplex Indoor Fireplace?
- J
  Jacob MarshallAug 27, 2025
  If the media in your Dimplex Indoor Fireplace is not illuminated, it could be because the unit is set to midnight mode, so ensure the color theme is not set to t0. Alternatively, a defective media LED strip or main control board could be the cause. In these cases, consider replacing the media LED strip or the main control board.
T
Tiffany VegaAug 28, 2025
Why is my Dimplex XHD23L Indoor Fireplace display flashing?
- S
  Steven ReevesAug 28, 2025
  A flashing display on your Dimplex Indoor Fireplace could be due to loose wiring, in which case you should check wiring connections. It might also indicate a defective power supply or main control board, requiring their replacement.
B
Brandon JohnsonSep 13, 2025
Why is the flame frozen on my Dimplex Indoor Fireplace?
- F
  fboyerSep 13, 2025
  If the flame is frozen on your Dimplex Indoor Fireplace, it could be due to a defective flicker motor, which would need replacing. Alternatively, the main control board might be defective and also need replacing.
M
Molly Fuentes DDSSep 14, 2025
How to fix light leaking around log set on Dimplex XHD23L Indoor Fireplace?
- E
  eric05Sep 14, 2025
  If light is leaking out around the log set of your Dimplex Indoor Fireplace, it's likely that the log set is not positioned properly. Refer to the instructions for replacing the log set and make sure the log set is connected to the base panel.
C
Cheyenne AllenSep 5, 2025
Why does the circuit breaker trip when I turn on my Dimplex XHD23L?
- G
  gmartinSep 5, 2025
  If the circuit breaker trips or a fuse blows when you turn on your Dimplex Indoor Fireplace, it could be due to two main reasons. First, the current rating of the circuit breaker or fuse might be exceeded by the combined power draw of the fireplace and other appliances on the same circuit. Try plugging the unit into another outlet or installing it on a dedicated 15 amp circuit. Second, there might be a short in the unit's wiring, in which case you should trace the wiring in the unit.
R
richardlewisSep 2, 2025
Why is the left half of the flame not visible on my Dimplex XHD23L?
- M
  Michelle BurtonSep 3, 2025
  If the left half of the flame is not visible on your Dimplex Indoor Fireplace, it could be due to a broken flicker rod, which would need to be replaced.