EasyManua.ls Logo

Dimplex XHD26L - User Manual

Dimplex XHD26L
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner’s Manual
IMPORTANT SAFETY INFORMATION:
Read this manual first before attempting to install or use this electric heater. Always comply with
the warnings and safety instructions contained in this manual to prevent personal injury or property
damage.
To view the full line of Dimplex products, visit www.dimplex.com
7216430100R02
Share the warmth and leave a review.
dimplex.com/sharethewarmth
Your input helps to create even better
products and experiences.
We value your feedback!
Models
XHD28L - 6913840259
XHD28G - 6913840559
XHD26L - 6913830259
XHD26G - 6913830559
XHD23L - 6913820259
XHD23G - 6913820559
XHD33L - 6910090259
XHD33G - 6910090559

Other manuals for Dimplex XHD26L

Questions and Answers

  • B
    Brandon CherryAug 27, 2025
    Why is the media not illuminated on my Dimplex Indoor Fireplace?
    • P
      Preston LucasAug 27, 2025
      If the media in your Dimplex Indoor Fireplace is not illuminated, it could be because the unit is set to midnight mode, so ensure the color theme is not set to t0. Alternatively, a defective media LED strip or main control board could be the cause. In these cases, consider replacing the media LED strip or the main control board.
  • B
    bradleynelsonAug 27, 2025
    Why is the flame not visible on my Dimplex XHD26L?
    • A
      Aaron MartinezAug 27, 2025
      If the flame is not visible on your Dimplex Indoor Fireplace, it could be due to several reasons. If you have log models, ensure the color theme is not set to t0, as the flame might be turned off. Another cause could be a defective flame LED strip or a defective main control board, in which case you should replace the flame LED strip or the main control board.
  • K
    Karen NelsonAug 25, 2025
    What to do if my Dimplex XHD26L Indoor Fireplace does not respond to the remote control?
    • K
      Kimberly AndersonAug 26, 2025
      If your Dimplex Indoor Fireplace isn't responding to the remote, the batteries might need replacing. You can change the batteries. Alternatively, the remote control or touchpad could be defective, requiring replacement.
  • M
    michaeljohnsonAug 25, 2025
    What to do if my Dimplex XHD26L does not turn on using the manual controls?
    • J
      Jordan BellAug 25, 2025
      If your Dimplex Indoor Fireplace isn't turning on with the manual controls, several factors could be at play. First, ensure the unit is not plugged into a power bar, surge protector, or extension cord. Check the fuse/breaker panel to ensure there is incoming power from the electrical wall socket. Other potential issues include a defective main control board, touchpad, or power supply, as well as a loose touchpad connection. In such cases, consider replacing the main control board, touchpad, or power supply and checking the touchpad connection.

Summary

Important Safety Instructions

Basic Precautions

Outlines fundamental safety measures to reduce risks of fire, shock, and injury during appliance use.

Special Precautions

Details specific safety warnings for unit handling, battery use, and temperature hazards.

Installation Guide

Placement Recommendations

Advises on proper placement, clearance, and opening requirements for installation.

Mounting Procedures

Details steps for mounting the fireplace, including media dispersal and mantel installation.

Operation and Controls

Touch Panel and Remote Control Overview

Introduces the touch panel and infrared remote control for operating the fireplace.

Product Warranty Information

Dimplex XHD26L Specifications

General IconGeneral
BrandDimplex
ModelXHD26L
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals