Dingo 950 Operation & Maintenance Manual
14
OPERATING INSTRUCTIONS
Read all the safety instructions and the pre start up section of this manual and the
engine manual before operating the Dingo.
Caution – Do not operate any of the control levers (including auxiliary lever) unless
you are standing with both feet on the platform and firmly holding the grip handles.
Important!
Ensure the Auxiliary hydraulic lever is in centre position before attempting to start
engine. The most common cause of ‘hard to start / engine will not turn over fast
enough / battery does not have enough power’ type starting problems is that the
auxiliary lever has been left on or knocked into gear and the engine is trying to start
under load. Ensure auxiliary lever is in centre position before starting engine.
Controls
Become familiar with the controls before starting the engine or operating the machine.
Key Switch
The Key Switch, used to start the engine, varies on Petrol and Diesel models. Check
engine manufacturers manual for starting instructions.
To shut engine off, rotate key to OFF position (counter clockwise direction).
Throttle
Move control forward/upward to increase engine speed and rearward/downward to
decrease engine speed.
Choke
For instructions regarding use of the choke (petrol models) refer to the engine
manufacturers manual.
To Next Page
Loading...
Need help?
General